40PV

The 40PV Horizontal Slurry Pump is a robust centrifugal pump designed for handling abrasive and corrosive slurries in industries like mining, mineral processing, and dredging.

Email:

YUNQUANPUMP@hbyqby.cn

Hotline:

86-18730251111

Inquire Now

Model Number Breakdown (40PV):

40 → Nominal inlet size (40mm or ~1.5 inches).
PV → Series designation (typically indicates a heavy-duty slurry pump with a focus on wear resistance).

(Note: Exact naming conventions vary by manufacturer—check supplier documentation for precise definitions.)

Key Specifications (Estimated):

Parameter	Value
Inlet Size	40mm (1.5 inches)
Outlet Size	32–40mm (1.25–1.5 inches)
Flow Rate	10–50 m³/h (44–220 GPM)
Total Head	10–30m (33–98 ft)
Impeller Diameter	150–250mm (varies by model)
Max. Solids	Up to 50–60% by weight
Particle Size	Up to 15–25mm (depends on impeller)
Speed	1000–1800 RPM
Motor Power	5.5–30 kW (7.5–40 HP)
Pressure Rating	Up to 6–8 bar (87–116 psi)

Design & Features:

Wear-Resistant Materials:
- High-chrome alloy (A05, A49) for abrasive slurries.
- Optional rubber lining for corrosive applications.
Efficient Hydraulics:
- Semi-open or closed impeller design for handling solids.
- Optimized volute casing to minimize wear and improve efficiency.
Sealing Options:
- Expeller seal (standard for slurries with solids).
- Mechanical seal (optional for finer slurries).
- Packing gland (traditional, low-cost option).
Maintenance-Friendly:
- Back pull-out design for easy servicing without disconnecting pipes.
- Heavy-duty bearings (grease or oil-lubricated) for extended life.

Typical Applications:

✔ Mining & Mineral Processing: Tailings, ore slurry, coal washing.
✔ Sand & Gravel: Dredging, sand pumping.
✔ Industrial Waste: Chemical sludge, abrasive wastewater.
✔ Power Plants: Ash handling, small-scale FGD systems.

Comparison to Similar Models:

Model	Key Difference	Best For
40PV	Compact, mid-range flow/head	Small-scale slurry transfer
50PV	Larger inlet (50mm), higher flow	Medium-duty applications
40QV	More heavy-duty construction	Extreme abrasion resistance

Manufacturer Cross-Reference:

Warman (Weir Group): Similar to AH or SP series (e.g., Warman 40SP).
Metso (GIW): Comparable to LSA or MDM series.
Chinese OEMs: Often labeled as 40PV with similar specs.

Maintenance Tips:

Inspect impeller and liners every 500 hours for wear.
Monitor seal performance (leakage indicates wear).
Lubricate bearings regularly (follow manufacturer guidelines).

40PV

The 40PV Horizontal Slurry Pump is a robust centrifugal pump designed for handling abrasive and corrosive slurries in industries like mining, mineral processing, and dredging.

Email:

whatsapp:

8618730251111

E-mail:

KirsSun@hbyqby.cn

Inquire Now